Enquiry


Contact Us


What We Offer


About Us


Home

Magnetic & Controls

View Enquiry Basket

Isolation And Ultra Isolation Transformers

Our wide array of isolation transformer is available in four model types. The raw materials which are used in the fabrication of these transformers are resourced from rich and consistent vendors. They are in accordance to the safety parameters of the industry. Customization is also available in all the aspects of our isolation parameters.
Isolation Transformer

Isolation Transformer

Transformer is the device which will step up or step down the voltage with out altering the frequency. Transformer are made in different type to name a few Auto type, Isolation Type, Isolation type with shield winding, Ultra isolation, K rated and so on as per the application requirement.
An Auto type transformer is the one which is of one winding running in series but separated on the same as primary and secondary as per the requirements of the subjected input and out put voltages requirements which is cost effective and has a serious problem of passing all the noise to the load and damages the electronic circuitry. Hence this is not widely used in most of the applications.

An isolation transformer is a device which is used to decouple two circuits, the load connected to this Isolation transformer and to the input supply. Isolation transformer suppresses electrical noises which occur in the Transmission line, because of the other loads connected in parallel. An isolation transformer block transmission of DC signals from one Circuit to other but allows AC signal to transmit, it also prevent interference caused by ground lope.
There are two types of noises which affect the load, one is the Common mode noise and the other is Normal mode noise (Transverse mode noises). Common mode noise happens between ground and line conductors. Normal mode noise occurs between Neutral to line conductors. This noise is the most dangerous and destructive one.
Few Features Of Isolation Transformer

1.Isolate primary winding and secondary windings.
2.Provides isolated neutral.
3.It protects micro processor based equipment from dangerous noises and reduces drive failures.
4.It can be useful where machine earth can’t be used.
5.By Providing Delta star isolation transformer, where there is problem of earth or neutral in the input side is taken care for the safety operation of the load by this Isolation transformer.
6.It arrest the noises of high frequency and noises generated by the usage of high current MCB,ACB, Induction furnace or other electro magnetic noises.

Add to Enquiry Basket

Ultra Isolation Transformer

Ultra Isolation Transformer

This is an advanced version of isolation transformer. Construction of ultra isolation transformers is very different from the regular isolation transformer.
In this secondary coils are split (or primary and secondary coils) as two or more coils according to the capacity of the transformer. The shielding method is also different because of the construction style. There is an inductance created between the coils because it is split. This inductance will give you more noise attenuation. As primary coil is not wound on top of the secondary coil the coupling capacitance is less. This is mainly required for wireless stations and costly life saving medical equipment.

Advantages Of Ultra Isolation Transformer:

1) High noise attenuation level even in the high frequency application.
2) Reduced coupling capacitance.
3) Core will not saturate even if the applied voltage is high.
4) Suitable for higher harmonic area installation.
5) Because of the lesser heat dissipation the life of the transformer is very high.

Add to Enquiry Basket

On Off

Home | About Us | What We Offer | Contact Us | Enquiry

Member IndiaMART.com© Magnetic & Controls, All Rights Reserved. (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited